Packaging Material Suppliers in Bangalore

BRANOtect Premium (Export) Anticorrosion Fluid

We protect your products. During shipment and storage.


Thin-bodied corrosion preventative made from mineral oil raffinates, petroleum distillates and anticorrosive additives. BRANOtect Premium contains neither silicone nor wool fat.

 

BRANOtect Premium builds on metal surfaces a highly effective temporary protective film against corrosion with good self-sealing tendency when break-ing. Traces of moisture on metal surfaces are infiltrated.

Application and Dosage

Transportation protection for all metal surfaces, mass products, precision work pieces, machines, accessories, tools, measuring tools, mechanical parts.

For the conservation of all metal parts against corrosion over a long period of time, e.g., store production, spare parts storage, long mail order over different climatic zones, long storage after dispatch.

Apply through dip-and-drain, painting, or spraying. Do not apply to hot parts.

BRANOtect Premium is to be used as described above (packaging/ protection of certain kinds of metal pieces). Otherwise, no responsibility for caused damages can be taken.

Range of Protection

BRANOtect Premium is suitable for all metals.

Duration of Protection

Depending on the climate, the contamination level of the air, and the pollution condition of the metal surface.

To be regarded as indicator:

In the right package, indoors: more than 5 years
Indoors, open: 5 years

In the right package, in the open: more than 5 years
In the open, under the roof: 5 years

More Product Information (PDF)

BRANOtect Basic (AIII) Anticorrosion Fluid



Thin-bodied corrosion preventative made from mineral oil raffinates, petrole-um distillates and anticorrosive additives. BRANOtect Basic contains neither silicone nor wool fat. This product stands out due to its outstanding flow prop-erties, good grease effect, and water displacement.

 

BRANOtect Basic is a versatile aid in dealing with metal parts. It builds on all metal surfaces an extraordinarily thin, and yet highly effective temporary pro-tective film against corrosion. It crawls along the upper metal surfaces until into fits, fissures, crevices and pore and displaces the adherent moisture. It greases all sliding metal surfaces and movable parts.

Application and Dosage

Transportation protection for all metal surfaces, mass products, precision work pieces, structural components, machines, accessories, tools, measuring tools, contacting instruments, all movable parts.

As conservation between some working steps, for in-process stock, e.g., store production, weekends, holidays, or closure. As mounting aid at work.

Because of its ability to creep, BRANOtect Basic can undo tight screws. Further application areas: household, vehicle servicing, vehicle maintenance.

Apply through dip-and-drain, painting, or spraying. Let evaporate for 1-2 hours. Do not apply to hot parts.

BRANOtect Basic is to be used as described above (packaging/ protection of certain kinds of metal pieces). Otherwise, no responsibility for caused damag-es can be taken.

Range of Protection

BRANOtect Basic is suitable for all metals.

Compatibility

BRANOtect Basic does not affect most plastics or lacquers. A compatibility test is recommended for bitumen and rubber products.

Work safety

Information about the work safety can be found in our Material Safety Data Sheets.

More Product Information (PDF)

BRANOrol VCI Anticorrosion Oil



Mineral oil-based anticorrosion oil without solvent, wax, wool fat, silicone or inorganic, ash-building additives.

 

BRANOrol protects in two different ways:

 

As oil film, directly on metal surfaces (protective coating)

 

Through giving off small amount of active anticorrosion ingredients above oil level in the surrounding atmosphere: the VCI principle (Volatile Corrosion Inhibitor). A permanent protecting atmosphere is built up in an enclosed
hollow space.

Application and Dosage

For hollow-space protection of gears, pumps, engines, cylinders, pipes, tanks, during shipment and storage of newly manufactured units; even during seasonal closure (farm machines, snow remover and boats). Not for hollow space of car bodies.

BRANOrol is simply poured or sprayed into the to-be-protected hollow space.

Afterwards, all openings are sealed as tightly as possible.

Dosage:

In general, up to 1 m³: 300 ml BRANOrol per m³ of hollow space. (Please inquire about bigger units.)

BRANOrol is to be used as described above (packaging/ protection of certain kinds of metal pieces). Otherwise, no responsibility for caused damages can be taken.

Range of Protection

Especially made for the protection of iron. If copper, brass or bronze is present, BRANOrol has to be fully sprayed on it at the beginning of the preservation. If magnesium, cadmium, zinc or lead is present, a certain rate of material abrasion is expected.

More Product Information (PDF)

BRANOral C10
Liquid Tarnish Preventive for Non-Ferrous Metals



Clear, alcoholic active ingredient solution for diluted use in treatment fluids or swill baths.

 

BRANOral C 10 produces an extremely thin, practically not distinguishable, passivation coating on non-ferrous heavy metals so that the resistance to tarnish, in the air or in the coil, is considerably improved. The usually fast drop of solder ability is prevented.

Application and Dosage

The application concentration is usually one percent in weight. Depending other requirements, tap water or deionised water (e.g., to avoid lime blast) can be used. Perfectly clean, carefully rinsed in mordant, the metal prod-ucts are dipped quickly in the BRANOral C 10 bath. To warm up the bath to approx. 50 - 60° C has a favourable effect on the protection. Flash rolls made of rubber eliminate the most liquid excess, then it is dried in hot air.

If metal bands, are greased e.g. on felts, then likewise, BRANOral C 10 (1%) can be added to the oil. On the other hand, an addition directly to the rolling oil makes little sense, because the passive coating is destroyed by every passage.

Under appropriate safety precautions, BRANOral C 10 can also be diluted and used in other organic solvents (e.g., alcohol, ester, ketone).

BRANOral-products are to be used as described above (packaging/ pro-tection of certain kinds of metal pieces). Otherwise, no responsibility for caused damages can be taken.

Range of Protection

Preferential for copper, bronze, and brass bands, but also for tubes, rails, wires, and for torsional, punching and pressing parts (as bulk material).

ADDRESS and LOCATION MAP

  • TOTAL PACK
    No. 51, Sree Nilaya, 1st Cross, Kurudu Sonnenahalli,
    near Lake Montfort School, Virgo Nagar Post, Bangalore, Karnataka 560049
  • Email:
    info@totalpack.in
  • Phone:
  • 9845722274
  • Working Hours / Working Days:
  • 09:30 A.M. to 06.00 P.M. / Monday to Saturday